Which Survey Do You Need in Adelaide? A Guide by Project Type
You know what you want to build, divide or buy. What you might not know is what the survey is called, who should order it, or when to book it. This guide works backwards from your project to the survey you actually need in South Australia.
It’s written by the Adelaide team at Astra Spatial Group. We’re a land surveying firm with offices in Adelaide, Sydney and Griffith, and over 50 years of combined experience across construction, local government, cadastral and land development work. We handle the whole survey journey in one firm: boundary, detail and contour, land division, construction setout and As Built.
Which survey do I need for my project in Adelaide?
Short answer: Most building projects in Adelaide start with a boundary survey and a detailed (contour) survey. Then you add a setout survey before construction and an As Built survey at completion. Land division and some older blocks need extra steps.
Find your project in the left column. The table shows the survey you’ll usually need, who normally orders it and the point in your project when it should be booked.
|
Your project |
Survey you'll usually need |
Who usually orders it |
When to book it |
|---|---|---|---|
|
New or replacement fence |
Boundary survey |
Owner, often shared with the neighbour |
Before the fencer quotes or digs |
|
Extension, carport, shed or granny flat |
Detail (contour) survey, plus a boundary survey if you're building near the line |
Owner or designer |
Before design starts |
|
Retaining wall |
Detail (contour) survey, plus a boundary survey if the wall is near the line |
Owner, designer or engineer |
Before engineering design |
|
Knockdown rebuild or new home |
Boundary survey (with a PFI if required), detail survey, setout survey and As Built survey |
Owner first, then builder |
Boundary and detail before design; setout before the slab |
|
Land division (Torrens or community title) |
Boundary and detail surveys, then a land division survey and plan |
Owner or developer |
Before you pay for concept plans |
|
Buying an established home |
Identification survey |
Buyer, often through their conveyancer |
Before you commit to buy |
|
Sloping block in the Adelaide Hills |
Detail survey with dense contours; drone or LiDAR on larger sites |
Owner or designer |
Before design starts |
|
Dispute with a neighbour |
Boundary survey and a Licensed Surveyor's report |
Owner |
Before any legal or fencing steps |
|
Finished build |
As Built survey |
Builder or developer |
At completion, when required |
The order matters as much as the survey itself. Boundary information comes first, design second and construction third. When that order slips, drawings get redone and builders wait.
When do you legally need a Licensed Surveyor in South Australia?
Short answer: You need a Licensed Surveyor whenever a boundary must be identified, marked or changed. In South Australia, only a licensed surveyor can carry out a boundary survey or place a mark that defines a property boundary.
Cadastral (boundary) surveying in South Australia is regulated by the Survey Act 1992. The Office of the Surveyor‑General sets and monitors the standards. According to the Office of the Surveyor‑General, you need a licensed surveyor to:
- divide land;
- identify and mark existing property boundaries on the ground;
- prepare and certify most plans of land division or amalgamation;
- create an easement, or identify where an existing easement sits;
- prepare plans under the Roads (Opening and Closing) Act 1991.
Every licensed surveyor appears on the Surveyors Board of South Australia register. It’s worth checking before you engage anyone. Our guide to questions to ask before hiring a surveyor in Adelaide shows you how.
Detail, contour and setout work doesn’t define the legal boundary. It does depend on knowing where that boundary is, though. That’s why it helps to use one firm that does both. We cover the legal triggers in more depth when you need a Licensed Surveyor in South Australia.
Can a detailed survey show where my boundary is?
Short answer: Not reliably. A detailed survey maps levels and features, and usually shows boundaries from title records rather than marking them on the ground. If you’re building near a boundary, you also need a boundary survey.
This is the most common mix‑up we see. A detailed survey tells your designer what’s on the site: levels, contours, buildings, trees, retaining walls and driveways. A boundary survey tells you where your land legally ends. They answer different questions. (Our explainer on boundary survey vs cadastral survey goes further.)
Here’s what that looks like on real Adelaide jobs:
- a side fence sitting 150 mm inside the true boundary;
- a retaining wall built partly over the line;
- a neighbour’s shed too close to the boundary;
- a drainage easement that changed the whole design.
In each case, the owner assumed the fence was right. A proposed wall, driveway or extension then had to be redesigned once the true boundary was confirmed.
Fences in older suburbs such as Unley, Burnside, Norwood, Prospect and Torrensville may have been replaced several times. Original survey marks may have disappeared decades ago. A boundary survey in Adelaide settles the question before design money is spent.
Which survey do I need before building or replacing a fence?
Short answer: A boundary survey. A Licensed Surveyor confirms and marks the legal line, so your new fence goes on the boundary rather than where the old fence happened to sit.A fence is physical. A boundary is legal. They’re not always in the same place.
If you and your neighbour are sharing a new fence, agree on the surveyed line before the fencer starts. Pegs are much easier to talk about than a fence that’s already been built.
If the survey shows the fence has been in the wrong place for years, you have options:
- move the fence to the true line;
- formally adjust the boundary (see boundary and fence adjustment);
- get advice if you and your neighbour can’t agree (see boundary disputes with neighbours).
What survey do I need for an extension, carport or granny flat?
Short answer: Usually a detailed (contour) survey for your designer, plus a boundary survey if you’re building close to a boundary. Order both before design starts, so the drawings use real levels and the true line.
Your designer needs accurate site information to place the new work and set floor levels:
- site levels and contours;
- existing buildings;
- retaining walls;
- driveways and hardstand areas;
- trees and vegetation;
- visible site infrastructure.
A topographic survey in Adelaide captures all of this in CAD format, ready for your architect or drafter.
If your extension, carport or granny flat runs close to a side or rear boundary, add a boundary survey. A setback that’s out by a small amount can mean redrawing plans after you’ve already lodged them.
If you’re mainly checking whether existing structures sit inside your title, an identification survey in Adelaide may be the better fit.
Which surveys do I need for a knockdown rebuild?
Short answer: Usually four. You’ll need a boundary survey (with a PFI if required) and a detail survey before design, a setout survey before the slab, and an As Built survey at completion where one is required.
Before design
Book the boundary and detail surveys as soon as you’ve chosen a builder or designer. Older Adelaide blocks often need extra boundary investigation, so this step shouldn’t wait.
Before construction
A setout survey transfers the approved design onto the ground, so the slab goes exactly where the plans say. Astra sets out most single dwellings within 1 to 2 days on site. Our guide to construction setout surveys explains what happens on the day.
At completion
An As Built survey records what was actually built and where. It’s used to confirm the finished work matches the approved plans. See As Built surveys in Adelaide for when one is needed.
We’ll cover the full sequence, including who orders each survey, in our upcoming guide to surveys for a knockdown rebuild.
What surveys do I need to divide my block in Adelaide?
Short answer: Start with a boundary survey and a detailed survey before you pay for concept plans. Once the layout works, a Licensed Surveyor prepares the land division plan that’s lodged with Land Services SA to create the new titles.
Land division is where survey timing matters most. Two blocks can look the same from the street. One has clean boundaries and good access. The other has an old encroachment or a drainage easement that changes the whole design.
We’ve seen land division proposals rejected for missing the required frontage by under 200 mm. We’ve also seen sewer infrastructure running through the middle of a proposed allotment. Both are easy to find with early survey work. Both are expensive to discover after designs are drawn.
Before you commit to a layout, you’ll also need to choose a title type and a layout:
- Title type. Land Services SA’s land division guidance lists four title types: Torrens Title, Community Title, Community Strata Title and Strata Title. See Torrens title vs community title.
- Layout. Frontage, driveway position and the existing house often decide between battleaxe or side by side layouts.
- Easements. Sewer and drainage easements shape where new homes can go. See easements in South Australia.
Land division approval is lodged through PlanSA under the Planning, Development and Infrastructure Act 2016. The certified survey plan is lodged with Land Services SA to issue new titles. The City of Salisbury says the full process typically takes around six months.
Our land division survey in Adelaide guide walks through each step. Our guide to how long a land survey takes in Adelaide covers what affects timing.
Should you get a survey before buying a house in Adelaide?
Short answer: It’s worth considering, especially for older homes. An identification survey checks whether the house, sheds and fences sit within the title boundaries, and whether anything encroaches from next door.
Encroachments rarely show up in listing photos. A retaining wall built partly over the line, or a shed sitting too close to the boundary, can affect your plans to extend, rebuild or divide later.
If you’re buying with a renovation or land division in mind, an identification survey gives you facts before you commit. Talk to your conveyancer about timing. Settlement deadlines don’t leave much room for surprises.
What survey do I need for a sloping block in the Adelaide Hills?
Short answer: A detailed survey with full contours, captured densely on steep ground. Add boundary work where retaining walls or cuts sit near the line. On larger or hard to access sites, drone and LiDAR capture can save time on site.
Adelaide Hills projects often involve sloping terrain, retaining walls and complex site levels. All of this needs to be pinned down before design and construction. Your designer and engineer work out cut, fill, driveway grades and wall heights from the survey. Thin contour data on a steep block can flow straight into a design that doesn’t work.
On large or steep sites, Astra uses drone and LiDAR capture to collect terrain data quickly and accurately. It’s a time saver for mapping. It doesn’t replace a Licensed Surveyor on the ground when the legal boundary needs to be defined.
For more, see surveying sloping blocks in the Adelaide Hills and drone and LiDAR surveys in Adelaide.
Will your survey need a Plan for Information (PFI)?
Short answer: It might, if your property is older. A PFI formally records modern survey information with Land Services SA. Your Licensed Surveyor decides whether one is needed and prepares it as part of the boundary work.
Many Adelaide suburbs were first surveyed a long time ago, and original records can be thin by today’s standards. Land Services SA’s Plan Presentation Requirements include an “Information” plan purpose. It’s used to lodge updated boundary information, survey marks and measurements for future reference.
For most owners, a PFI isn’t something you manage yourself. It’s an extra step behind the scenes, and it can affect timing. Our upcoming Plan for Information (PFI) guide explains what it records and why.
Is a land surveyor the same as a building surveyor?
Short answer: No. A land surveyor measures land, levels and legal boundaries. A building surveyor, often called a building certifier, checks building plans and work against building rules. Your project may need both, for different jobs.
Search results often mix the two up, so it’s worth being clear when you ring around:
- Licensed Surveyor (land surveyor): for boundaries, detail and contour surveys, setout, land division or As Built.
- Building surveyor or certifier: for building approval and stage inspections.
- Building and pest inspector: for the condition of a house you’re buying, which is a different service again.
How do you check the information you already have?
Short answer: Start with your title and any existing survey plan, then ask a Licensed Surveyor to interpret them. Online maps are a useful first look, but they can’t place a fence, wall or slab on the ground.
You may already hold useful records: a Certificate of Title, a deposited plan, or a survey plan from a previous owner. Our guide on how to read your survey plan explains what the lines and numbers mean.
The Office of the Surveyor‑General points owners to the South Australian Property and Planning Atlas (SAPPA) for property information. Treat online maps as a starting point only (more on that in online property boundary maps).
If you spot a white post or blue paint near your boundary, it may mark a survey mark. Leave it where it is. Our article on common mistakes that damage survey marks explains why.
Not sure which survey your project needs?
Short answer: Tell us the address and what you’re planning. We’ll tell you which surveys you need, in what order, and who needs the results, so your designer and builder can get started on the right information.
You don’t need to know the survey name before you call. That’s our job.
Astra Spatial’s Adelaide team works with homeowners, builders, designers and developers across Adelaide and the Adelaide Hills. One team handles your boundary, detail, land division, setout and As Built work, so the information carries through from first drawing to final handover. You get one point of contact and fewer delays between consultants.
Call our Adelaide office on (08) 7079 8257 or contact Astra Spatial. Tell us about your project, and we’ll recommend the right survey to start with. You can also read more about our surveying services in Adelaide or how to choose a Licensed Surveyor in Adelaide.
What else do Adelaide property owners ask about surveys?
Who usually orders the survey: me or my builder?
Owners usually order the boundary and detail surveys, because designers need them before drawings start. Builders often order the setout survey before the slab, and an As Built survey at completion. On land division, the owner or developer engages the Licensed Surveyor directly. Check your building contract so nobody assumes someone else has booked it.
Can I find my property boundary on SAPPA or an online map?
Online maps are a good first look, not a boundary answer. The Office of the Surveyor‑General points owners to the South Australian Property and Planning Atlas (SAPPA) for property information, but a map line can’t place a fence or wall on the ground. Only a Licensed Surveyor can identify and mark your boundary.
Can a surveyor come onto my property without permission in SA?
Yes. Under the Survey Act 1992, a surveyor, or a person authorised in writing by a surveyor, may enter premises while carrying out a survey, according to the Office of the Surveyor‑General. Good surveyors still give neighbours notice, explain the work and keep gates and pets secure. If you’re unsure who’s on site, ask which firm they’re from.
Can I remove a survey mark or white post on my property?
Don’t remove it without checking first. The Office of the Surveyor‑General says white PVC posts are commonly used to mark Permanent Survey Marks, and you must contact the OSG before removing one. Survey marks help surveyors find boundaries, so damaging them can make your next survey, or your neighbour’s, harder to complete.
Is land division the same as subdivision in South Australia?
Yes, in practice. South Australia calls the process land division, while other states usually say subdivision. If you’re searching for a subdivision surveyor in Adelaide, you need a Licensed Surveyor who handles land division. Planning approval is lodged through PlanSA under the Planning, Development and Infrastructure Act 2016, and new titles issue through Land Services SA.

